If your filter is not adjustable and is too powerful or is not powerful enough, the only real solution is to buy a different filter that will accommodate the needs of your fish. Your best bet is to get a filter with an adjustable flow rate. This is more or less a problem that you can only solve by buying the right filter. You see, different fish need different water flow rates, with some liking a heavy flow to swim against and some that can’t handle fast-flowing water and just get swept around the tank. Now, this is not actually a problem with the filter itself, but it does affect your fish. Improper Flow Rate Image: andreibucataru.ro, ShutterstockĪnother pretty serious problem that many people experience with their fish tank filters is an improper flow rate. If nothing works, then you probably have a busted filter and will most likely need to order replacement parts or replace the filter all together.ģ. This is an especially big problem for people who use sand as substrate because it has a tendency to bunch up and jam filters, which is also true for people who use small pebbles or very small rocks, as one of them is often more than enough to cause a severe clog. Whatever method of unclogging you use, make sure to get everything out of the filter because if you don’t do it right the first time, you will just have to do it again. You can also try using water from your sink to flush it out. Search for the clog with your eyes and if you see it, remove it. Luckily, this is a problem that is solved fairly easily.Īll you really need to do is to completely take the filter apart piece by piece until all possible parts are disconnected. If you can hear the filter motor running but you can see no visible suction, then chances are that you have got yourself a clogged intake tube, impeller, or outtake tube. The most common issue when there is no suction in the filter is that there is a clog somewhere along the line. You see, a fish tank motor run an impeller that serves to suck water from your fish tank into the intake tube, through the filter media, and back out the other side in the form of perfectly clean water. One of the most common problems that people experience with their fish tank filters is that there is a loss of suction or no suction at all. Loss of Suction or No Suction at All Credit: RobinsonThomas, Shutterstock Keep in mind that the extent of the damage will determine how expensive it is to fix the motor and the filter in general, so if there is too much to be done, it may just be cheaper to spring for a brand new filter, most likely not the one that just broke though (this one is a good option).Ģ. We aren’t mechanics and, likely, neither are you, but if the motor itself is the problem, you can always buy repair kits. If none of these things are the problem, then the most likely issue is the motor itself. There might be a blown fuse, a tripped breaker, a broken cord, or broken wires, most of which can be easily repaired or replaced. There could also be an issue with the power source or the connective cables. However, a power surge may also completely fry the filter and force you to get replacement parts or a whole new filter. A power surge may cause the filter to give out and may only require you to wait for a few hours before turning it back on. If you need to, you can use your hands, use lightly compressed air, or if the motor itself is waterproof, just blast some water through the motor.Īnother cause of a completely silent and not working filter is a power surge, which may have happened in your home. Just open up the filter, take it apart piece by piece, and unclog it. The solution to a clogged motor is fairly simple. This is much like our second point, which has to do with a clogged impeller, intake, or outtake tube, but in this case, something might be stuck in the motor.Ī clogged intake or impeller will still try to suck in water but will only make noise and actually do nothing, whereas a filter with a clogged motor won’t turn on at all. One of the biggest causes of a fish tank filter that just won’t run is a clogged motor. This can be due to a number of different reasons. Something that many people experience when it comes to their fish tank filters is that the filter just won’t run or simply won’t turn on. It Just Won’t Run or Simply Won’t Turn On Credit: underworld, Shutterstock
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |